23.10.2021
 
 
Counter

Contact and Non-Contact Vehicle Stopping Technology

The Vehi-Halt technology was developed for the purposes of effectively stopping a moving vehicle using electromagnetic pulses.  


There are 4 different models of Vehi-Halt:
1. Portable contact system “Vehi-Halt PCS” (« »)
2. Stationary contact system “Vehi-halt SCS” (« »)
3. Portable non-contact system “Vehi-Halt PNS” (« »)
4. Stationary non-contact system “Vehi-Halt SNS” (« »)


How it works:
The system releases a powerful electromagnetic and electric pulse into the target vehicle. The vehicle’s onboard acceleration electronics and computer short-circuit and burn out, thus disabling the vehicle and bringing it to a halt.

Implementations:
Vehi-Halt was developed for law-enforcement, counter-terrorism, and national security purposes.  Assisting officers to quickly and easily disable moving vehicles during high-speed chases.


Vehi-Halt PCS
« »

Technical specifications of Vehi-Halt PCS
6. System releases pulse automatically when the vehicle goes over the device.
7. Size of device without electrical input: 2 x 2 x 0.8 in, (50 x 50 x 20 cm)
8. Weight: 32 kg (75 pounds)
9. Electrical Input: 12 volt to 220 volt
10. Maximum speed of vehicle for device to work: 150 mph (250 kph)

Vehi-Halt PCS lies on the ground. Once the vehicle goes over the device, it releases a powerful electro-magnetic and electric pulse to short-circuit the computers and on-board electronics in the vehicle. This Disables further acceleration and stops the engine to bring the vehicle to a safe stop.


Vehi-Halt SCS
« »

Technical specifications of Vehi-Halt SCS
7. System releases multiple-pulses automatically
8. Impulse frequencies: 8 GHz
9. Maximum effective perimeter: 4900 ft (1500 m)
10. Size of device without electrical input: 4.75 x 2 x 6.3 in (120 x 50 x 160 cm)
11. Weight: 120 kg (265 pounds)
12. Electrical Input: 12 volt to 220 volt
13. Maximum speed of vehicle for device to work: 150 mph (250 kph)

Vehi-Halt SCS stands like a small wall.  It is activated automatically and releases a series of powerful electro-magnetic and electric waves to disable the moving vehicle.  Operates at a much bigger range than the PCS model and is used primarily to secure a desired perimeter.


Vehi-Halt PNS
\« »

Technical specifications of Vehi-Halt PNS
1. Maximums range of effectiveness: 6.5 ft (2 m)
2. Impulse strength: 12 Giga-volts
3. Size of device without electrical input: 4 x 4 x 0.8 in (100 x 100 x 20 cm)
4. Weight: 120 kg (260 pounds)
5. Electrical Input: 12 volt to 220 volt

Vehi-halt PCS model that can be activated manually.


Vehi-Halt SNS
« »

Technical specifications of Vehi-Halt SNS
1. System releases pulse manually
2. Impulse strength: 3.6 GHz
3. Maximum range: 39 ft (12 m)
4. Weight: 260 kg (575 pounds)
5. Electrical Input: 12 volt to 220 volt
6. Maximum speed of vehicle for device to work: 150 mph (250 kph)

Vehi-Halt SPS model that can be activated manually

 
< .   . >
TO POTENTIAL PARTNERS!
!
THE RANGE OF DEVICES SCS-BARS
- RU+ENG